Skip to main content

Asphalt Shingles as Roofing Material and its Types

Asphalt Shingles As Roofing Material And It's Types


The manufacture of asphalt roofing materials has been undergone from the 1890s. Today asphalt shingles cover 70 to 80 percent of the roofs in the United States. It has now spread to different parts of the world.

The asphalt roof shingles are very attractive, versatile, and provide high fire and wind resistance. The shingles cost is economical which makes it relatively inexpensive in terms of aesthetics and the durability it provides to the building.

The asphalt shingles can be very easily installed and require little maintenance. The normal life expectancy of the asphalt roof shingles is in the range of 15 to 20 years. The fiberglass shingles provide a life expectancy of 20 to 30 years.


Asphalt Roof Shingles
Asphalt Roof Shingles

Types of Shingles for Roof

Organic Shingles

The organic-based asphalt shingles consist of a base mat composed of cellulose fibers made from recycled paper or the wood chips and cotton or the wool rugs. But presently it is made of asphalt-saturated roofing felt. It is coated with asphalt on both sides as shown in the figure below.

The strength of the shingles is provided by the base mat. The base material is in a saturated state. It is covered with a flexible asphalt that has a high melting point which is called the saturant.

Ground limestone, slate, trap rock, or other inert materials are used to reinforce the saturant which is mineral stabilizers. The coarse mineral granules are pressed on the exposed phase of the asphalt coating which provides color for the asphalt. This exposed phase helps the shingle to resist the weather and the fire.

The materials used as coarse mineral surfacing are natural colored slate or ceramic coated rock granules. Each shingle’s backside is covered with talc, mica, or sand. This will prevent the shingle to prevent sticking to each other.

Fiberglass Shingles

The first entry of fiberglass was in the late 1950s. By the 70s they have grown up as traditional asphalt shingles.

The fiberglass asphalt shingle has a base mat that is saturated and covered by means of flexible asphalt. It is also surfaced with mineral granules.

When compared with cellulose fiber mat, the fiberglass shingles have a very less weight and thickness. Compared with organic asphalt shingles, the fiberglass shingles consist of more asphalt.

The organic shingles have chances to soak the water up from the underneath. This results in the curling up of the bottom. This made the demand of organic-based shingles to decrease.

Deck Requirements for Asphalt Shingles

The asphalt shingles are installed over a solid roof deck. In general, the slope necessary to install asphalt shingles is in the range from 4 in 12 through 21 in 12 by employing a standard installation method.

The asphalt shingles can also be used in slopes in the range of 2 in 12 which are flat and 21 in 12 that are steeper in nature. But special application procedures apply.

Types of Asphalt Shingles

Two types of asphalt shingles are mainly used in roof construction. One is three-tab shingles. This has two slots, that divide the exposed part of the shingle into thirds. The second one is the laminated shingles or architectural and dimensional shingles.

These are presently used in a wide range. The laminated shingles consist of two layers that make it thicker and wind-resistant.

Repair of Asphalt Shingles

Shingles are available from the market in the form of strips. They are laid over the concrete decks or boards laid over the roof area and pressed by means of nails.

Proper alignment of the strips helps in filling up the roof by shingles in a systematic manner, leaving no gaps and spaces.

Properly aligning the shingle strip over the end of the roof and pressing by nails to the boards
Properly aligning the shingle strip over the end of the roof and pressing by nails to the boards

Each Strip is properly aligned and pressed to avoid gaps
Each Strip is properly aligned and pressed to avoid gaps

Sometimes the reason for missing shingles may result in leaks or worn outs. Or there are situations where we have to disturb the shingles to install a roof vent or plumbing vent.
Such removal is advised to be done when the shingles are in a cooled state. This will make the adhesive beneath the layer to be brittle and easier for removal. Removal under hot conditions will tear the roof shingle.

Popular posts from this blog

What Are The Different Types Of Roofs?

What Are The Different Types Of Roofs? The roof is the uppermost portion of the building which protects the building from rain, wind, and sun. Various types of roofs used may be divided broadly into three types: 1. Flat roofs 2. Pitched roofs 3. Shells and folded plates. Flat roofs are used in plains where rainfall is less and climate is moderate. Pitched roofs are  preferred wherever rainfall is more. Shells and folded plate roofs are used to cover large  column-free areas required for auditoriums, factories, etc. Brief description of these roofs is  presented below: 1. Flat Roofs These roofs are nearly flat. However slight slope (not more than 10°) is given to  drain out the rainwater. All types of upper-story floors can serve as flat roofs. Many times  top of these roofs are treated with waterproofing materials-like mixing waterproofing  chemicals in concrete, providing Coba concrete. With the advent of reliable waterproofing  techniques, such roofs are constructed e

The Common Rafter and Purlin Roof

The Common Rafter and Purlin Roof As a civil engineer or roof contractor, you should aware of the construction of a roof and trussed roofs also types of roof construction in the industry. So, here our new article about roof rafter and purlin roof related to roof construction. The structure is most commonly used where there is a gable at both ends of the roof and is frequently to be found on terraced houses, as indicated in the below picture. This simple form of roof is illustrated in below picture. Its construction has been included here because of the now very common refurbishment of such houses. The wall plates are often simply bedded on mortar on either the inner skin of a cavity wall or, as is often the case with older terraced houses, on the inside edge of a solid 9 in. brick wall. Wall plates should be half lapped where they meet, and should not be less than 75 mm wide and 50 mm thick. They should be treated with preservative. Below picture shows typical plate co

The Coupled Roof, Ceilings And Trusses

The Coupled Roof, Ceilings and Trusses M oving off from early roof forms that provided each wall and roof in one unit, succeeding development showed a real roof designed on masonry or timber walls. the only type of roof was a coupled roof, consisting of 2 lengths of timber bearing against one another at the highest and resting on a plate at their feet. The timbers, known as couples, were pegged along at the highest with timber dowels and were equally pegged or spiked to the plate. The term ‘couple’ was used until the fifteenth century once the terms ‘spar’ or ‘rafter’ began to be used. The term rafter in fact continues to be wont to describe the piece of timber during a roof spanning from the ridge to the place. paced regarding four hundred millimeters apart tied solely by horizontal binders and tile battens. the easy couple was adequate for tiny span dwellings and steep pitches, however the outward poke force at the feet of the rafters caused stability issues with the walls